Labconco FreeZone 2.5 Liter -50 C Benchtop Freeze Dryer, 115 V
FreeZone 2.5 Liter Benchtop Freeze Dry System is designed for light sample loads or personal use. Compact design with a small footprint that fits in tight spaces. Upright stainless steel collector coil removes a maximum of 2 liters of water in 24 hours and holds 2.5 liters of ice before defrosting is necessary. * Vacuum pump, drying accessory, and freeze-dry glassware are required (not included). * Freeze drying rate will be lower for samples other than shell-frozen plain water. For optimum performance, room temperature should be 70 °F / 21 °C or colder.
Temperature: -58 °F / -50 °C
Product Dimensions: W 12.6" × D 17.9" × H 16.9"
- Powder-coated steel exterior
- 1/4 hp refrigeration system
- LCD for display of set up and operating parameters, alarm messages and total number of hours since refrigeration and vacuum were serviced
- Audible/visual alarm for abnormal system event (power failure, improper line voltage supply, collector temperature above -40 °C, moisture in collector, and service vacuum pump)
- Patented moisture sensor
- Vacuum control and break valve
- RS-232 port
- One button automatic refrigeration and vacuum start up with manual overrides
- Collector drain hose
- 3" diameter accessory attachment port
- 3' of 3/4" ID vacuum hose and 2 clamps
- Powder-coated steel exterior
- 1/4 hp refrigeration system
- LCD for display of set up and operating parameters, alarm messages and total number of hours since refrigeration and vacuum were serviced
- Audible/visual alarm for abnormal system event (power failure, improper line voltage supply, collector temperature above -40 °C, moisture in collector, and service vacuum pump)
- Patented moisture sensor
- Vacuum control and break valve
- RS-232 port
- One button automatic refrigeration and vacuum start up with manual overrides
- Collector drain hose
- 3" diameter accessory attachment port
- 3' of 3/4" ID vacuum hose and 2 clamps