Labconco Purifier Logic+ Biological Safety Cabinet, Class II, Type A2, 4'

Labconco Purifier Logic+ Biological Safety Cabinet, Class II, Type A2, 4'

This Purifier Logic+ Class II, Type A2 Biosafety Cabinet provides personnel, product, and environmental protection from hazardous particulates such as agents that require Biosafety Level 1-, 2- or 3-containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos, and additional substances that generate hazardous airborne particulates. It is designed to discharge HEPA-filtered exhaust air directly into the laboratory, or an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter.


*Base stand not included*


With 10-Inch Sash Opening, Service Fixture, and Vacu-Pass Portal


Product Dimensions: W 54.3" × D 31.2" × H 61.7"

  • Electronically Commutated Motor (ECM)
  • Constant Airflow Profile (CAP) Technology airflow monitoring system that communicates with the ECM to deliver the precise volume of air as required and automatically adjust as filters load without relying on airflow sensors
  • Air-Wave Entry System
  • Contain-Air Negative Pressure Channel
  • Smart-Start System that allows the user to program start up and shut down operations
  • Night-Smart System that idles the blower when the sash is fully closed
  • Built-in interval or elapsed timer for experiment monitoring, fluorescent light or UV light control
  • Digital clock
  • Removable towel catch located under work surface
  • Bright, 90 – 100 foot-candle, glare-free fluorescent lighting located outside the contaminated work area
  • LCD information center with "Filter Life Remaining" bar graph, status line for alarm conditions and alerts to warn when filter life diminishes to 20 % and 0 %
  • Electronic security lock (optional activation) that requires code to operate the cabinet
  • Two electrical duplex receptacles located one on each side, with ground fault interruption
  • Intrinsically safe negative pressure design
  • Fully-closing, clear 1/4" tempered safety glass sash
  • Stainless steel inlet grille with Reserve-Air Secondary Airflow Slots
  • Supply and exhaust 99.99 % efficient HEPA filters
  • Leak-tight stainless steel interior
  • Interior-mounted, line-of-sight, full color LCD information center with easy-to-understand MyLogic OS
  • Curved inlet grille for forearm support
  • Flush-mounted stainless steel electrical receptacle covers with dampened hinges
  • Removable, seamless type 304 stainless steel, dished work surface with lift out knobs
  • 10° Angled sash with counterbalanced, anti-racking mechanism for ease of lifting
  • ADA-compliant touchpad control on right-hand side post for manual activation of blower, light(s), timer, electrical receptacles, audible alarm mute and menu selection
  • Approximately 70 % air recirculation
  • Powder-coated steel exterior
  • NSF International and ETL listed