Lyophilizer, FreeZone Plus, 6L Cascade Console Freeze Dry System, 230V

Lyophilizer, FreeZone Plus, 6L Cascade Console Freeze Dry System, 230V

The FreeZone Plus 6 Liter Cascade Console Freeze Dry System is designed for light to moderate loads of low eutectic point samples. It removes a maximum of 4.1 liters of water in 24 hours.

 

Temperature: -119 °F / -84 °C

 

Product Dimensions: W 32" × D 28" × H 36"

  • Removes a maximum of 4.1 L of water in 24 hours. Freeze drying rate will be lower for samples other than shell-frozen plain water. For optimum performance, room temperature should be 70 °F / 21 °C or colder
  • LCD displays system operating parameters, set-up parameters and alarm messages (choice of temperature in °C and °F, choice of vacuum in mbar, Pa and Torr)
  • Two 1/3 hp CFC-free refrigeration systems
  • Red alarm light and moisture sensor
  • LED vacuum and temperature wave graphs
  • Vacuum control/break valve
  • Rear-mounted RS-232 port
  • Automatic start-up switch for collector cool-down and vacuum pull-down with manual override switches
  • Hot gas defrost and switch
  • Retractable collector drain line
  • 3" diameter port for connection of drying accessory
  • Power switch
  • Rear-mounted electrical receptacle for vacuum pump connection
  • 3/4-inch outer diameter connection and 3/4-inch inner diameter hose
  • Two clamps